Fuji FRENIC-Ace and TECO-Westinghouse EQ7 multiprotocol Ethernet option card.
EtherNet/IP, Modbus/TCP, BACnet/IP, PROFINET IO and AB CSP Industrial Ethernet connectivity for Fuji FRENIC-Ace and TECO-Westinghouse EQ7 ASDs.
In Stock
The OPC-PRT multiprotocol communication interface provides Ethernet-based network connectivity to Fuji FRENIC-Ace and TECO-Westinghouse EQ7 adjustable speed drives (ASDs).
MRP (Media Redundancy Protocol) and DLR (Device Level Ring) allows for fast recovery and high availability. Dual RJ-45 ports with embedded IEEE 802.3 10BASE-T/100BASE-TX Ethernet switch supports star, daisy-chain, and redundant ring topologies. Shielded RJ-45 connectors accept standard CAT5-type 8-conductor unshielded twisted-pair (UTP) patch cables. MDI/MDI-X auto-crossover allows the use of any combination of straight-through and cross-over Ethernet cables. Supports multiple protocols simultaneously.
A configurable network timeout action can also be programmed that allows function codes to have their own unique "fail-safe" conditions in the event of a network interruption. The configuration studio provides discovery, network setting, configuration, real-time monitoring, and firmware updates.
Note that some drives may require an additional option attachment or enclosure that is not included with the OPC-PRT option kit. Contact Fuji Electric or TECO-Westinghouse technical support for more info.
The Fuji Electric Configuration Studio is required to view, edit, and download configurations.
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent