ETH-200

The ETH-200 Ethernet Multiprotocol Network Gateway allows information to be transferred seamlessly between many different fieldbus networks with minimal configuration requirements. The ETH-200 provides an IEEE 802.3 10BASE-T/100BASE-TX Ethernet port, two RS485 ports, one RS232 port, and three common serial ports for direct connectivity to Toshiba adjustable speed drives (ASDs). The Ethernet port accepts standard CAT5-type 8-conductor unshielded twisted-pair (UTP) patch cables and supports multiple protocols simultaneously. The RS-485 ports are half-duplex 2-wire (A / B / Signal Ground / Shield) and allow a selection of various master and slave protocols. The RS232 port can be used to configure the unit, update the internal firmware, upload/download files or act as a control protocol port. These various communication ports operate independently, and are configurable along with the unit's internal point database via the configuration tool.

There are three common serial (aka logic level) ports for connection to Toshiba 7-series, 9-series, 11-series or VF-nC1 ASDs. ASD connections use the same standard RJ45 style 8-conductor UTP patch cables: any standard CAT5 Ethernet cable (found in most electronics stores) 5 meters or less in length can be used. ASD connections are automatically established and continuously monitored: no drive configuration needs to be performed to connect the unit to the drives. Just plug it in - it's that simple.

The ETH-200 is a member of the ICC Network Gateway Series product family. Members of this family are designed to provide a uniform interface, configuration and application experience. This commonality reduces the user's learning curve, reducing commissioning time while simplifying support. The ETH-200 provides simultaneous support for many different communication protocols, allowing complex interchanges of data between otherwise incompatible networks.

The heart of the Network Gateway Series concept is an element called the "point database". The point database is entirely user-configurable, and provides the mapping information that allows requests from the various supported networks to be interpreted and stored in a common format. This allows data to be routed from any supported network to any other supported network.

Additionally, the point database provides the added benefit of "data mirroring", whereby current copies of point values (populated by a "source port" designation) are maintained locally within the gateway itself. This greatly reduces the request-to-response latency times on the various networks, as requests (read or write) can be entirely serviced locally, thereby eliminating the time required to execute a secondary transaction on a different network.

When properly configured, the gateway will become essentially "transparent" on the networks, and the various network devices can engage in seamless dialog with each other.

Schneider Collaborative Automation Partner Program brochure

• ICC CAPP Brochure.pdf

Manuals

• ETH-200 V1.130 User's Manual

Version Information

• ETH-200 Version Info

A comparison between the ETH-200 and ETH-1000 gateways

• ETH-200 vs. ETH-1000 Comparison

Firmware

• ETH-200 V1.130 BSP

This BSP (Board Support Package) contains:

• ETH-200 V1.130 application firmware file (.bin file for use with the Rabbit Field Utility)
• ETH-200 V1.130 User's Manual (in Adobe Acrobat .PDF format)
• ETH-200 Version Info (in Adobe Acrobat .PDF format)
• ETH-200 EDS File

Software

• Rabbit Field Utility
• ETH-200 Configuration Tool V1.1 - Prior to running the configuration tool, confirm that the device has been updated to the latest firmware version to ensure compatibility

Associated Links