| 12.19.2022 UL/cUL Certification Mirius - The Mirius has received UL/cUL Certification.
|
| 09.14.2021 New Product: A8NETH-V2 - Multiprotocol real-time Ethernet connectivity to Mitsubishi 800-series drives (ASDs).
- Dual RJ-45 ports support star, daisy-chain, and redundant ring topologies for high availability.
- MDI/MDI-X allows the use of any combination of straight-through and cross-over cables.
- See A8NETH-V2 User's Manual for more details.
|
| 02.22.2021 V3.2.3.1 Release Software Update: ICC Configuration Studio - Fixed issue when downloading a configuration to the ETH-1000 where the studio may stay at the “Waiting for Device to Become Ready”message.
- See ICC Configuration Studio Version Info for details on the latest software release.
|
| 12.17.2020 V4.300 Release Firmware Update: PicoPort - Added a Factory Reset option to the Run Mode network configuration parameter.
- Increased the USB Serial Sniffer buffer size and maximum number of packets.
- Fixed BACnet COV detection issue when the special NaN value is used.
- Added support for the CD-6G detector to Macurco Modbus Monitor.
- Added a new Normalized Reading (Float) parameter for each detector to Macurco Modbus Monitor.
- See PicoPort Version Info for details on the latest firmware release.
|
| 12.17.2020 V4.300 Release Firmware Update: Mirius - Added a Factory Reset option to the Run Mode network configuration parameter.
- Increased the USB Serial Sniffer buffer size and maximum number of packets.
- Fixed BACnet COV detection issue when the special NaN value is used.
- Added support for the CD-6G detector to Macurco Modbus Monitor.
- Added a new Normalized Reading (Float) parameter for each detector to Macurco Modbus Monitor.
- See Mirius Version Info for details on the latest firmware release.
|
| 12.17.2020 V3.2.3.0 Release Software Update: ICC Configuration Studio - Added a new Normalized Reading (Float) parameter for each detector to Macurco Modbus Monitor.
- Improved USB communication error handling and recovery.
- See ICC Configuration Studio Version Info for details on the latest software release.
|
| 12.17.2020 V1.7.3.1 Release Software Update: Network Parameter Utility - Updated PicoPort and Mirius firmware.
- Improved USB communication error handling and recovery.
- See NPU Version Info for details on the latest software release.
|
| 12.09.2020 New Product: G500XLT - Multiprotocol RS-485 option card for Galt Electric G500 series inverters.
- See G500XLT User's Manual for more details.
|
| 12.09.2020 New Product: G500ETH - Multiprotocol Ethernet option card for Galt Electric G500 series inverters.
- Dual RJ-45 ports support star, daisy-chain, and redundant ring topologies for high availability.
- MDI/MDI-X allows the use of any combination of straight-through and cross-over cables.
- See G500ETH User's Manual for more details.
|
| 06.08.2020 V3.1.3.3 Release Software Update: ICC Configuration Studio - Fixed database mapping issue with ETH-1000 BACnet/IP Server objects.
- Added all BACnet engineering units to Units selection for BACnet Analog objects.
- See ICC Configuration Studio Version Info for fixes and improvements in the latest software release.
|
| 05.27.2020 V4.200 Release Firmware Update: PicoPort - Added Modbus RTU Firewall Router protocol.
- Added support for Relinquish/Release Events to BACnet MS/TP Server, Metasys N2 Slave, and Siemens FLN Slave.
- Added support for Manual Triggers to Generic Serial Master transactions.
- Added support for Received Events to Generic Serial Slave transactions.
- See PicoPort Version Info for details on the latest firmware release.
|
| 05.27.2020 V4.200 Release Firmware Update: Mirius - Added Modbus RTU Firewall Router protocol.
- Added support for Relinquish/Release Events to BACnet MS/TP Server, Metasys N2 Slave, and Siemens FLN Slave.
- Added support for Manual Triggers to Generic Serial Master transactions.
- Added support for Received Events to Generic Serial Slave transactions.
- See Mirius Version Info for details on the latest firmware release.
|
| 05.27.2020 V3.1.3.2 Release Software Update: ICC Configuration Studio - Added Modbus RTU Firewall Router protocol to PicoPort and Mirius.
- Added Relinquish/Release Events to BACnet MS/TP Server, Metasys N2 Slave, and Siemens FLN Slave for PicoPort and Mirius.
- Added support for a Manual Trigger to Generic Serial Master transactions for PicoPort and Mirius.
- Added support for a Receive Event to Generic Serial Slave transactions for PicoPort and Mirius.
- Added constant value support to the Bit Copy database logic operation to allow easily setting or clearing individual bits in the database.
- See ICC Configuration Studio Version Info for details on the latest software release.
|
| 05.27.2020 V1.7.3.0 Release Software Update: Network Parameter Utility - Added theming support to the Port Diagnostics window.
- Added support for the Modbus RTU Firewall Router protocol.
- See NPU Version Info for details on the latest software release.
|
| 10.23.2019 V1.6.3.0 Release Software Update: Network Parameter Utility - Added a Port Diagnostics tool located in a new Tools menu. This tool allows a user to view the number of bytes sent, received, and received with an error on the network in real time.
- Changed the "Address" setting to "MAC Address" for BACnet MS/TP Client and Server.
- Changed how the NPU is packaged. The ZIP archive now contains a directory that includes the software version.
- See NPU Version Info for details on updates in this version.
|
| 09.30.2019 V2.0.3.0 Release Software Update: ICC Modbus Master Tool - Added support for all register types (Coils, Discrete Inputs, Holding Registers, and Input Registers) by allowing a read function code (RFC) and write function code (WFC) to be defined in the XML profile.
- See ICC Modbus Master Tool Version Info for details on updates in this version.
|
| 09.20.2019 V1.400 Release Firmware Update: A8NXLT - Removed Product Identifier (Pr. 1302) parameter and associated checks that default other network configuration parameters if Pr. 1302 does not match the card's product identifier.
- Added support for forcing a reset of the card if a reset was requested from the drive and the drive did not reset the card.
- Fixed issue where RS-485 bus was actively driven when the protocol is set to "Disabled".
- See A8NXLT Version Info for details on the latest firmware release.
|
| 08.14.2019 V1.5.3.4 Release Software Update: Network Parameter Utility - Added support to overwrite network configuration parameters when downloading a DUF file that uses a different Product ID than what is on the device.
- Added support to show the default image for the device, if available, for unsupported products that are not defined in AppConfig.xml when ShowUnsupportedProducts is enabled.
- Fixed issues with device name, image, description, protocol overrides, and setting overrides for hexadecimal product ID's containing letters.
- See NPU Version Info for details on updates in this version.
|
| 07.22.2019 1.4.2 Release App Update: NetLink - Fixed SQL injection vulnerability.
- Updated to target Android Pie (API level 28).
- Added support for prompting for storage permissions when importing/exporting.
- Updated menus to better support modern Android devices.
- Fixed issue where app opens and immediately closes on some devices.
- Fixed crash issue that can occur when Android system is low on memory.
- See NetLink Version Info for details on the latest release.
|
| 06.06.2019 New Product: A7NETH-V2 - Multiprotocol real-time Ethernet connectivity to Mitsubishi 700-series drives (ASDs).
- Dual RJ-45 ports support star, daisy-chain, and redundant ring topologies for high availability.
- MDI/MDI-X allows the use of any combination of straight-through and cross-over cables.
- See A7NETH-V2 User's Manual for more details.
|
| 11.26.2018 V4.100 Release Firmware Update: PicoPort - Fixed issue in Metasys N2 slave driver where COS notifications stop being sent to the master.
- Fixed delays in Metasys N2 COS reporting on high traffic networks.
- Improved Metasys N2 slave COS checking when the driver is running on multiple ports.
- See PicoPort Version Info for details on the latest firmware release.
|
| 11.26.2018 V4.100 Release Firmware Update: Mirius - Fixed issue in Metasys N2 slave driver where COS notifications stop being sent to the master.
- Fixed delays in Metasys N2 COS reporting on high traffic networks.
- Improved Metasys N2 slave COS checking when the driver is running on multiple ports.
- See Mirius Version Info for details on the latest firmware release.
|
| 11.26.2018 Metasys V5.700 Release Firmware Updates: Millennium Gateway Series |
| 11.26.2018 V3.0.3.7 Release Software Update: ICC Configuration Studio - Fixed issue with Modbus/TCP Client service objects when 32-bit registers are used and the database data type is not 32 bits.
- Fixed issue where device stays online but is not shown in Online Devices if errors occur when downloading a configuration.
- Fixed issue where Product ID setting is sometimes marked with an error after going online with a device.
- Improved UI performance of USB Serial Capture Window when connecting to a USB serial port.
- See ICC Configuration Studio Version Info for details on improvements in this version.
|
| 11.26.2018 V1.5.3.1 Release Software Update: Network Parameter Utility - Updated PicoPort and Mirius firmware.
- Fixed issue where setting visibility overrides were not applied when an unsupported protocol is active.
- Fixed issue where status text stays at "Ready" after clicking the reload button.
- Setting validation performance improvements.
- See NPU Version Info for details on updates in this version.
|
| 07.24.2018 V4.000 Release Firmware Update: PicoPort - BACnet BTL Re-Certification changes.
- Added support to Modbus RTU Slave driver for mapping Coils and Discrete Inputs directly to database locations.
- Updated Macurco Modbus Monitor driver to support sensor addresses from 1 - 99.
- See PicoPort Version Info for details on the latest firmware release.
|
| 07.24.2018 V4.000 Release Firmware Update: Mirius - BACnet MS/TP drivers are now BTL Certified.
- BACnet BTL Certification changes.
- Added support to Modbus RTU Slave driver for mapping Coils and Discrete Inputs directly to database locations.
- Updated Macurco Modbus Monitor driver to support sensor addresses from 1 - 99.
- See Mirius Version Info for details on the latest firmware release.
|
| 07.24.2018 V3.0.3.3 Release Software Update: ICC Configuration Studio - Added support for Modbus RTU Slave for PicoPort and Mirius to map Coils and Discrete Inputs directly to database locations.
- Reworked Database and Diagnostics to improve flexibility and performance.
- Reworked Object List and related events to improve performance when adding, removing, and modifying items.
- Improved USB driver installation.
- Various performance improvements.
- See ICC Configuration Studio Version Info for details on the latest software release.
|
| 07.24.2018 V1.5.3.0 Release Software Update: Network Parameter Utility - Fixed USB discovery of devices when values other than default are used for the Product ID.
- Added the ShowUnsupportedProducts OEM tag to AppConfig.xml.
- Changed behavior of when the Timeout setting is shown.
- Fixed issue with negative values for BACnet UTC Offset.
- See NPU Version Info for details on the latest software release.
|
| 01.10.2018 V3.200 Release Firmware Update: PicoPort - Added override release support to Metasys N2 Master and Siemens FLN Master.
- Increased configuration file memory by 25%.
- Increased object memory by 7%.
- Fixed issue where network configuration parameters were reset when updating the device using the NPU.
- See PicoPort Version Info for details on the latest firmware release.
|
| 01.10.2018 V3.200 Release Firmware Update: Mirius - Added override release support to Metasys N2 Master and Siemens FLN Master.
- Increased configuration file memory by 25%.
- Increased object memory by 7%.
- Fixed issue where network configuration parameters were reset when updating the device using the NPU.
- See Mirius Version Info for details on the latest firmware release.
|
| 01.10.2018 Metasys, FLN V5.600 Release Firmware Updates: Millennium Gateway Series |
| 01.10.2018 V2.7.3.0 Release Software Update: ICC Configuration Studio - Added override release support to Metasys N2 Master and Siemens FLN Master.
- Added support to trigger network parameters to be overwritten on the PicoPort and Mirius.
- Fixed various minor issues.
- See ICC Configuration Studio Version Info for details on new features in this version.
|
| 01.10.2018 V1.4.3.1 Release Software Update: Network Parameter Utility - Updated PicoPort and Mirius firmware.
- See NPU Version Info for details on updates in this version.
|
| 12.14.2017 V1.4.3.0 Release Software Update: Network Parameter Utility - Changed USB behavior so that only devices defined in AppConfig.xml are discovered.
- Changed behavior of default values for all settings when selecting a new protocol so that the values from the device's configuration are used instead of fixed defaults for the protocol.
- Fixed issue where the Address setting may be marked with an error incorrectly after selecting the BACnet MS/TP protocol and clicking Reload or changing the protocol again.
- See NPU Version Info for details on improvements in this version.
|
| 10.27.2017 V1.3.3.0 Release Software Update: Network Parameter Utility - Added validation check for BACnet MS/TP Max Master and Address settings to ensure that the Address is never less than Max Master.
- Fixed validation range on BACnet MS/TP Max Master.
- See NPU Version Info for details on improvements in this version.
|
| 10.11.2017 New Product: Mirius Now Available! - Multi-interface serial gateway for RS-485, RS-232, UART, and I/O.
- See Mirius User's Manual for more details.
|
| 09.07.2017 V1.2.3.0 Release Software Update: Network Parameter Utility - Added Macurco Modbus Monitor protocol.
- Added support for the BACnet Fail-safe Timeout setting.
- See NPU Version Info for details on improvements in this version.
|
| 09.07.2017 V2.6.3.0 Release Software Update: ICC Configuration Studio |
| 09.07.2017 V3.100 Release Firmware Update: PicoPort - Added Write Triggering feature.
- Added fail-safe timeout functionality to BACnet MS/TP Server.
- See PicoPort Version Info for details on the latest firmware release.
|
| 08.14.2017 New Product: A8NXLT - Multiprotocol RS-485 connectivity to Mitsubishi 800-series drives (ASDs).
- See A8NXLT User's Manual for more details.
|
| 08.02.2017 We've Moved! ICC has moved to our new Verona, WI location - Our new address is 230 Horizon Drive, Suite 100, Verona, WI 53593
|
| 07.14.2017 V1.1.3.0 Release Software Update: Network Parameter Utility - Added support for BACnet Max Info Frames setting.
- Improved error detection when writing parameters and resetting the device.
- Added the "Disabled" protocol selection to disable a device's network port.
- Added support for Modbus RTU Sniffer Timeout setting.
- See NPU Version Info for details on improvements in this version.
|
| 03.02.2017 V1.0.3.4 Release Software Update: Network Parameter Utility - Added support for the Mirius.
- Updated USB device drivers.
- Improved exception handling.
- Fixed various issues.
- See NPU Version Info for details on improvements in this version.
|
| 01.04.2017 1.3.4 Release App Update: NetLink - Improved Demo Mode Warning text to inform the user to select a plugin from the protocol selection in the settings menu.
- Changed the "Temporary License (Expires ...)" status in the About box to "Refund Period (Renews ...)".
- Fixed issue where the license type is indicated as temporary instead of permanent after updating.
- Improved efficiency of OEM licensing checks.
- See NetLink Version Info for details on the latest release.
|
| 12.19.2016 V1.0.3.1 Release Software Update: Network Parameter Utility - Fixed issues with invalid settings when switching protocols.
- Improved behavior of settings when switching protocols and connecting or disconnecting devices.
- See NPU Version Info for details on improvements in this version.
|
| 12.19.2016 V2.5.3.0 Release Software Update: ICC Configuration Studio |
| 12.19.2016 V2.500 Release Firmware Update: PicoPort - Added support for port diagnostics byte counters.
- Added support for custom control of the status LED.
- See PicoPort Version Info for details on the latest firmware release.
|
| 11.16.2016 New Software: Network Parameter Utility - Configure and update devices in the field with ease.
- Automatically discovers and connects to devices via USB.
- Light-weight and portable, no installation necessary.
- See Network Parameter Utility web page for more details.
|
| 10.28.2016 V2.4.3.0 Release Software Update: ICC Configuration Studio - Added Expand/Collapse and Expand/Collapse All Items Below options to the Project pane.
- Fixed issues with errors and expand/collapse state when copying and pasting items.
- Fixed issue where the recent file list is reset after upgrading to a new version.
- See ICC Configuration Studio Version Info for details on improvements in this version.
|
| 10.28.2016 V4.002 Release Firmware Updates: ETH-1000 - Fixed issue in BACnet/IP Client where simultaneous write requests would not be serviced.
- See ETH-1000 Version Info for details on the latest firmware release.
|
| 10.28.2016 V2.400 Release Firmware Update: PicoPort - Fixed issue in FLN Slave where writes to LDO's would not apply the bitmask properly.
- Optimized startup routines to decrease boot time.
- Fixed issues with receive errors for DMX-512 Slave.
- Improved Generic Serial driver's detection of variable length database data for ASCII decimal numbers with leading '+' or '-' characters.
- See PicoPort Version Info for details on the latest firmware release.
|
| 09.15.2016 V2.3.3.0 Release Software Update: ICC Configuration Studio - Added a restriction so that read-only service objects cannot overlap with write-only service objects under the same protocol.
- Fixed issues with Batch Update Mode when updating a device whose configuration is locked.
- Fixed issue where the configuration on a locked device could be lost if a firmware update is performed as part of the download configuration procedure.
- See ICC Configuration Studio Version Info for details on improvements in this version.
|
| 09.15.2016 V2.300 Release Firmware Update: PicoPort - Changed the encoding of the Firmware Version network configuration parameter from 0xMMmm, where M is the major revision and m is the minor revision to FW_VERSION × 1,000, where FW_VERSION is the full version, such as 2.300.
- Added support to Generic Serial driver for handling leading '+' characters for ASCII decimal numbers.
- See PicoPort Version Info for details on the latest firmware release.
|
| 09.01.2016 New Product: A8NETH-2P - Multiprotocol real-time Ethernet connectivity to Mitsubishi 800-series drives (ASDs).
- Dual RJ-45 ports support star, daisy-chain, and redundant ring topologies for high availability.
- MDI/MDI-X allows the use of any combination of straight-through and cross-over cables.
- See A8NETH-2P User's Manual for more details.
|
| 08.30.2016 1.3.3 Release App Update: NetLink - Added plugin version and licensing information to the About box.
- Added support to BACnet/IP plugin for communicating on all active network interfaces on the device simultaneously.
- Added BBMD NAT support to BACnet/IP plugin
- Improved the OEM licensing checks.
- See NetLink Version Info for details on the latest release.
|
| 08.18.2016 V2.2.3.0 Release Software Update: ICC Configuration Studio - Added support for configuration locking for the PicoPort.
- Added support for Real-time Clock Settings in BACnet MS/TP Client and Server for the PicoPort.
- Fixed issue in USB Serial Capture Window when saving PCAP files where proper format could not be detected when incomplete capture lines are received.
- Other minor fixes.
- See ICC Configuration Studio Version Info for details on new features and improvements in this version.
|
| 08.18.2016 V5.200 Release Firmware Updates: Millennium Gateway Series - Fixed issue where the serial driver would not detect errors on the first byte of a packet.
- Fixed issues with using the USB Virtual COM port with Windows 10.
- Added support for 7 data bits to the USB Pass-Through Mode.
- See DNET-1000 Version Info for details on the latest firmware release.
- See ECAT-1000 Version Info for details on the latest firmware release.
- See ETH-1000 Version Info for details on the latest firmware release.
- See PBDP-1000 Version Info for details on the latest firmware release.
- See XLTR-1000 Version Info for details on the latest firmware release.
|
| 08.18.2016 V2.200 Release Firmware Update: PicoPort - Added support to BACnet MS/TP Client and Server so that the APDU Timeout, Number of APDU Retries, and Max Master property values set over the network are persistent across reboots.
- Added support for time and date information in BACnet MS/TP Client and Server by utilizing an externally-provided real-time clock mapped into the device's database.
- Fixed issues with using the USB Virtual COM port with Windows 10.
- Added support for 7 data bits to the USB Pass-Through Mode.
- See PicoPort Version Info for details on the latest firmware release.
|
| 06.22.2016 V2.1.3.1 Release Software Update: ICC Configuration Studio - Fixed issue with Batch Update Mode where downloading a configuration to a device would not work.
- Changed the default MELSEC Client port to TCP port 2009 for consistency with MELSEC Server.
- Changed some MELSEC Client setting names.
- See ICC Configuration Studio Version Info for details on improvements in this version.
|
| 06.16.2016 V2.1.3.0 Release Software Update: ICC Configuration Studio |
| 06.16.2016 V5.100 Release Firmware Updates: Millennium Gateway Series |
| 06.16.2016 V2.101 Release Firmware Update: PicoPort - Added Database Matched Byte to Generic Serial.
- Added ASCII entry option to Generic Serial.
- See PicoPort Version Info for details on the latest firmware release.
|
| 05.11.2016 V2.0.3.11 Release Software Update: ICC Configuration Studio |
| 05.11.2016 V2.100 Release Firmware Update: PicoPort - Doubled the maximum supported configuration file size.
- Added support for a configurable Product ID.
- Minor bug fixes.
- See PicoPort Version Info for details on new features in this firmware version.
|
| 04.26.2016 New Website: ICC Launches New Website - ICC website fully redesigned.
- If you are an existing user, you can log into your account
after resetting your password with the "Forgot your password?" link on the sign in page.
|
| 03.11.2016 Version 2 Release Software Update: ICC Configuration Studio |
| 03.11.2016 Version 5 Release Firmware Updates: Millennium Gateway Series - Updated BACnet drivers for BTL compliance.
- Added NAT and Alerton support to BACnet/IP BBMD.
- Added Generic Serial Master and Generic Serial Slave drivers.
- Added support for ADF, ADI, and BD object types to Metasys N2 Slave.
- See DNET-1000 Version Info for details on firmware version V5.100 release.
- See ECAT-1000 Version Info for details on firmware version V5.000 release.
- See ETH-1000 Version Info for details on main firmware version V5.000 release.
- See PBDP-1000 Version Info for details on firmware version V5.000 release.
- See XLTR-1000 Version Info for details on firmware version V5.000 release.
|
| 03.11.2016 Version 2 Release Firmware Update: PicoPort - BACnet MS/TP drivers are now BTL Certified.
- Increased Object Memory capacity by 50%.
- Added Persistent User Parameters.
- Added Host - Network Pass-Through mode.
- Added Generic Serial Master and Generic Serial Slave drivers.
- Added support for ADF, ADI, and BD object types to Metasys N2 Slave.
- See PicoPort Version Info for details on new features in this firmware version.
|
| 03.04.2016 V1.1.3 Release Firmware Update: A7NETH-2P |
| 08.05.2015 New Product: A7NETH-2P - Multiprotocol real-time Ethernet connectivity to Mitsubishi 700-series drives (ASDs).
- Dual RJ-45 ports support star, daisy-chain, and redundant ring topologies for high availability.
- MDI/MDI-X allows the use of any combination of straight-through and cross-over cables.
- See A7NETH-2P User's Manual for more details.
|